Nice. Week ago I messed with this. Got many goods tips.

so good

thanks!~

One of the best screencast.

Hello, Is possible that flash message disappears after 5 seconds?

Hi, very cool screencast. I was looking for some good ajax advice and now I have it! I have one question though: where did you place the .rjs file?

put the .rjs somewhere in the views directory. typically the directory where the rest of the views for a specific controller can be found.

Hey Ryan,
I noticed that you use "form_remote_for". But, the Agile book and the Ajax on Rails book all refer to "remote_form_for". Are they different? Or, is "form_remote_for" an Edge Rails thing?

Great screeencast as always!

Michael,

Yes, it's probably possible to do what you are describing. You'd use some of the Scriptaculous visual effects, which Ryan did not cover in this episode. You'd do something like "page[:notice].visual_effect :fade, :duration => 5"
I did not try this. So, I can't verify. But, in theory, you'd do something like that to get the effect you want.

@Fred, if you look in the API docs you can see form_remote_for is an alias of remote_form_for - so either one will work. While I like the sound of remote_form_for better, I get confused because there's no corrosponding remote_form_tag. There's only form_remote_tag and that parallels better with form_remote_for. So I've got used to using that.

ryan,
Ah, that explains it. I never ever look at api docs. haha. . .

another useful screencast! Is there a way to combine the update of the flash via AJAX with your screencast 18 (looping through flash)?

Great episode!

@maze, yep. You can loop through the flash hash as is done in that episode. For example, place this in the rjs file:

flash.each do |key, msg|
page.replace_html key, msg
end

You may want to move this into a helper method so it can be called from any rjs file.

You´re the king, Ryan!

Hey Ryan! thanks a lot! So I'll try to build my first helper method! :-)

This is great, waiting with the validation. When the next part is coming?
Thanks.

Fantastic! They just keep getting better.

Thank you!

Ryan,

Just a small tip, instead of setting the flash and then unsetting it you can use this:

flash.now[:notice] = "..."

This way it won't be passed to the next action :)

@Andreas, thanks for the tip. The reason I can't do that in this case is I need the flash to stick around if it's still a normal HTML request (non-AJAX). I don't want to set it in two places so in this case I think discarding it in the RJS is the best solution.

@Ryan, hadn't thought of that, very well then :).

What happens when two different people submit reviews at the same time (or nearly the same time)? Would they be able to see each other's messages?

@Rebort, nope, not without reloading the page. However, you can use a technology called Comet to "push" data to the client. This way all users viewing that page will automatically update when a review is added. I haven't done it myself, and I'm not sure how hard it is to do in Rails.

For more information on Comet:
http://en.wikipedia.org/wiki/Comet_(programming)

Excellent -- thanks for the clarification and link, Ryan!

This might have been the perfect screen cast. You really nailed it, Ryan!

I'm having some problems getting it to work. I have the controllers Tips and Programs, which share a HABTM relationship.

In the `Tips#new` view I have a <ul> list of items in Programs, in the style of "HABTM Checkboxes", the railscast.

On the bottom of the page (outside the main form) I have a `form_remote_for :programs, :url => programs_path`. In the `Programs#create` function I create a Program instance, and respond_to format.js. I have a create.js file in the same folder, which renders a partial also used in the `Tips#new` view (btw, can I get DRY on this? It seems I have to have a duplicate file in both view/* folders).

However, whenever I submit the remote form, it shows the JavaScript code directly in the browser, as if it send the wrong Content-Type header. I have tried going over the code several times, but I cannot find the error.

@Mikoangelo, I need to see the code in order to determine what's wrong. But here's not the best place to post that. Instead I recommend making a thread over at railsforum.com. I visit that frequently and would be glad to help over there.

Great screen cast Ryan. When you update the html with the @review object, are you able to access it's relational objects? In other words, in the partial that you're rendering, can you access the user table to display: @review.user.human_name ?

Thanks for all the screen casts. They're great.

Bryce

@bryce, yep. You can access associations through the model in the partial. It's just like any other view.

Hi Ryan, thank you for the work you've been doing. Lot's of great tips.
On this subject I'd like to see how to handle validation erros, and which would be the best way to display them.

So nice! Thanks so much for all your casts.

I'm interested in the way to do the same but with validations (RJS and "normal" version). In "normal" version, how to cleanly re-call/re-render the 'show' action of 'ProductsController' with the non-created-and-with-validation-errors Review, as we are in two different controllers? A link to help me? Thanks again!

How about automagically calling flash.discard in every format.js block?

Ryan, Very nice work, been helping me a great deal with setting up a blog. but I run into a huge hurdle where the rjs is not rendering after the respond_to call. I've checked the rjs with a link_to_remote and its working fine. code done just like in your notes. Any reason that this would happen

Excellent screencast. I've got it working beautifully. Thing is... ordinarily, I'm zebra striping my comments (comments instead of reviews, in my case) with <div class="comment <%= cycle("odd", "even") %>"> in my comment partial. Since the page.insert_html is a single insert, and thus, it never cycles, I'm not getting my zebra striping until I refresh.

How might I go about rewriting my zebra striping code to account for this page insert? And, as a followup, if I wanted to display which number comment it was, something I previously did with each_with_index, how might I get that info as well?

Thanks so much!

Hi Ryan,

I got problem with rjs.

It's redirection problem ... I think.

It starts at http://localhost:3000/freddys.

And after I hit update button which send all params via form_remote_tag to server and use rjs to update current page.

However, it render at http://localhost:3000/user/update/2 and display content of the rjs file.

Any idea ... thanks

Ryan,

this is another great screen cast. My problem is, that i want to achieve exactly what you show here, including model based validation. Any possibility to achieve that "the rails way"?

i was trying to download the file and store this video in another PC,
but i was unable to download it,is it not possible with out quicktime player installed in my PC ?.
aah,but later i installed player but this time the movie itself is playing in the browser..
plz help me how to download the file seperately
thanks,,

Hi,

Probably heard it a hundred times already but thanks for all the screencasts. They really are excellent and find them to be a great resource!

I encountered a strange problem that I'm not really sure I understand. While experimenting with the ideas from your screencast I decided to add a respond_to block to a method being called through AJAX. After I did that whenever I made the AJAX call Rails complained that it couldn't find the partial that I was trying to render in my corresponding RJS file. I check my RJS and surely it was render :partial => 'form' and the partial was named _form.html.erb. The only way I could get it to work was if I removed the format.js statement from the respond_to block.

Basically this works (controller):

def fill
@post = Post.new
@post.title = "Fill"
@post.body = "Fill"

respond_to do |format|
format.html { redirect_to(posts_url) }
format.xml { head :ok }
end
end

But this doesn't:

def fill
@post = Post.new
@post.title = "Fill"
@post.body = "Fill"

respond_to do |format|
format.html { redirect_to(posts_url) }
format.xml { head :ok }
format.js #This line causes an issue
end
end

What gives?

Rom

This was new for me. It's amazing at how well thought out rails is.

Thanks again for the video Ryan.

Ryan,

I know that you're not Rails tech support, but wondering how much this has changed with the release of Rails 2.1.

I have a clean 2.1 demo site - using cookie store - with basically the same set up as your screencast. The HTML POST form works fine, but when I switch to form_remote_for in my view file, I get an 'ActionController::InvalidAuthenticityToken' error. This only occurs when using remote. I do have a responds_to for js, and a corresponding create.js.erb, but it appears that the action never gets called. The request dies before it gets there due to the authenticity error.

If I comment out protect_from_forgery in application.rb, I receive a 200 response, but it appears that the request has a content length of 0.

I know I'm missing something simple. I'll keep digging, but wondering if you've you run across this in your travels?

Ok, I figured it out, but not sure why it is...yet. Turns out my example _was_ slightly different; I was using a table - instead of divs - to format the form.

As soon as I removed the table, it worked.

I'll have to dig into the source code in order to figure it out.

Thanks for listening. ;-)

You seriously rock! Thanks for this.

this is beautiful. i think i'm going to cry :) thanks for all your help!

how can download the file via rjs